CATEGORY 01 · 4 FAMILIES · 13 MODELS
LiFePO4 Battery Packs and Modules, 1.28 kWh to 16.08 kWh
No inverter, no cabinet logic. Cells, a BMS and a steel box that fits a 19-inch rack, a wall bracket or a lead-acid footprint. Four families, thirteen models, all built on the same cell platform.
WHAT THIS CATEGORY IS
The part that goes inside someone else’s system
These packs are for people who already know what they are building. Integrators who weld their own enclosure and need a documented CAN map. Installers replacing a lead-acid bank in a boat or a telecom hut without changing the wiring. Distributors who stock one pack across several inverter brands because it talks to all of them.
What you do not get here is an inverter, a display or a fire suppression system. Those live in the all-in-one line and the C&I cabinets. What you do get is a pack with a published register map, a 6,000-cycle warranty basis and a weight and footprint you can check against your own design before you commit.
FOUR FAMILIES
Pick by what has to come out and what has to go in
FAMILY 01
51.2V LiFePO4 Battery Pack
5.12 – 16.08 kWh
For integrators who need a standard 48V-class pack with a CAN map they can read, and parallel up to ten units without a master controller.
51.2V 100Ah · 51.2V 314Ah · 440mm wide · IP20 · 6,000 cycles
View family →
FAMILY 02
12V / 24V Lead-acid Replacement
1.26 – 5.12 kWh
For marine, RV and small off-grid installs where an AGM box comes out and this goes into the same tray with the same cables.
12V and 24V · 100Ah and 200Ah · LFP or NCM · IP50 · 8 models
View family →
FAMILY 03
Floor-standing Battery
10.24 – 16.08 kWh
For homes that need more capacity than a wall bracket can carry. Stands on its own footprint, no fixing to the wall, no lifting gear.
LFP 10 kWh · LFP 16 kWh · 935mm tall · 200A continuous · optional aerosol
View family →
FAMILY 04
Wall-mounted Powerwall
2.5 kWh
For a single room or one backup circuit where floor space does not exist. 150mm deep, hangs on two bolts.
24V 100Ah · 23.5 kg · 380 × 415 × 150mm · RS485 / CAN · Grade A cells
View family →ALL 13 MODELS
One table, sorted by energy
Weights are net, without packaging. Dimensions are the battery itself, not the carton. If you are checking whether a pack fits an existing tray, the third column from the right is the one that matters.
| Model | Family | Chemistry | Energy | Voltage | Weight | Dimensions (mm) |
|---|---|---|---|---|---|---|
| 12V 100Ah | 12/24V | NCM | 1.26 kWh | 12.6V | 9.5 kg | 330 × 172 × 216 |
| 12V 100Ah | 12/24V | LFP | 1.28 kWh | 12.8V | 10.3 kg | 330 × 172 × 216 |
| Powerwall 24V 100Ah | Wall | LFP | 2.50 kWh | 25.6V | 23.5 kg | 380 × 415 × 150 |
| 12V 200Ah | 12/24V | NCM | 2.52 kWh | 12.6V | 18.5 kg | 345 × 190 × 245 |
| 24V 100Ah | 12/24V | NCM | 2.52 kWh | 25.2V | 19.5 kg | 345 × 190 × 245 |
| 12V 200Ah | 12/24V | LFP | 2.56 kWh | 12.8V | 20.1 kg | 345 × 190 × 245 |
| 24V 100Ah | 12/24V | LFP | 2.56 kWh | 25.6V | 20.6 kg | 345 × 190 × 245 |
| 24V 200Ah | 12/24V | NCM | 5.04 kWh | 25.2V | 35.0 kg | 520 × 267 × 220 |
| 24V 200Ah | 12/24V | LFP | 5.12 kWh | 25.6V | 38.0 kg | 520 × 267 × 220 |
| 51.2V 100Ah | 51.2V | LFP | 5.12 kWh | 51.2V | 65 kg | 440 × 586 × 143 |
| Floor-standing 10 kWh | Floor | LFP | 10.24 kWh | 51.2V | 73 kg | 444 × 935 × 247 |
| 51.2V 314Ah | 51.2V | LFP | 16.08 kWh | 51.2V | 106 kg | 440 × 742 × 230 |
| Floor-standing 16 kWh | Floor | LFP | 16.08 kWh | 51.2V | 110 kg | 444 × 935 × 247 |
NCM models cycle about 3,000 times, LFP about 6,000. Both are rated at 80% depth of discharge. Usable energy is lower than nominal on every model and is listed on the family pages.
BEFORE YOU ORDER
Three things buyers ask about this category
Can I put more than one pack in parallel?
Yes. The 51.2V packs parallel up to ten units, which takes the 100Ah version to 50 kWh and the 314Ah version to 160.8 kWh. The 12V and 24V drop-ins parallel too, but keep the count even and match the age of the packs. Do not add a new pack to a bank that has been cycling for a year, because the BMS in the older units will fight the new one over current sharing.
Which inverters do these talk to?
The 51.2V packs speak CAN to most hybrid inverters and RS485 to the rest, and we publish the register map so your own controller can read them without a gateway. The 12V and 24V drop-ins are inverter-agnostic: they behave like a lead-acid bank with lower internal resistance. Send us the inverter model before you order and we will confirm the cable and the protocol in writing.
LFP or NCM, which one should I order?
LFP for daily cycling and anything that sits in a warm room. LFP runs 6,000 cycles against 3,000 for NCM, so on a daily cycle the price difference pays back in about four years. NCM earns its place when the pack has to work below freezing, or when you are replacing a lead-acid box and every kilogram counts. Both share the same 80% depth of discharge and the same IP50 case on this family.
Can I order a single pack as a sample?
Yes, one unit per model at list price, freight on your account. If a production order follows within 90 days, we deduct the sample cost from the invoice.
QUICK QUOTE
Tell us the model and the quantity
You do not need to fill in a long form. Send the model name, the quantity and the inverter you are pairing it with. We come back with a unit price, a packing list and a loading estimate, usually within 12 hours on a working day.
Also in the range: All-In-One ESS · Stacked Home ESS · C&I Storage Cabinets · Back to all products